waterproofing

Showing 1–16 of 21 results

Ballast matting is a decoupling mat beneath rail systems. In the railway (railroad /am.) construction it is used as sub ballast matting, and in mass spring systems it is an elastic layer. These track-bed mats reduce structure-borne noise as well as vibration emissions. The service life of the ballast matting is lengthened by lower and more even stress.
 A special mixture of rubber granulates, microcellular rubber and polyurethane foam on a recycling basis, bonded with PU-elastomer, provides the desired effects. For more information visit the brochure section.

The UGA system in Australia encompasses mainly CABLE PENETRATION SEALS as well as EXTERNAL PIPE SLEEVES that can be retrofitted to existing pipe or cable penetrations so the penetration can be sealed against water or gas (or oils in some cases). The UGA range also covers FIRE PLUGS of different sizes that can be used to plug holes to give a Fire-rated penetration. For more information visit the brochure section.

The Koster waterproofing system is a range of specialty remedial products able to be used by a tradesman or handyman alike. Koster, from Germany, have specialised in such systems for decades all over the world. Whether the project is restoration of a heritage building, fixing a leaking pool internal basement waterproofing plugging in rushes of water within seconds, potable water solutions or waterproofing products which work from both the Positive & Negative side of the structure, Projex/Koster now have the optimum solution. Koster is perfect for jobs needing basement waterproofing (leaking basement repair) or other areas where access is restricted to the external surface. For more information visit the brochure section.

Link-Seal Modular Seals are a positive hydrostatic seal that seals the annular space and is considered to be the premier method for permanently sealing pipes of any size passing through walls, floors and ceilings. Link-Seals are a robust product and are specially formulated to withstand attack from ozone, UV, water, hydrocarbons and a wide range of chemicals. Link-Seals are also available for a wide variety of special applications, temperature extremes, exotic chemical combinations and for slightly “out of round” or non-centered applications. For more information visit the brochure section.

 

SHOCKMAT has many commercial and industrial applications and is ideal as a protective matting medium. It is also widely used for waterproofing membranes protection, walkways and to protect the ballast on railway bridges. As a membrane protective medium SHOCKMAT is cheaper and easier to install than tiles or concrete screeds – you simply just roll it out. A roll of SHOCKMAT is an easy to handle roll of reclaimed rubber, sourced from the tyre industry, bonded together with high quality polyurethanes. For more information visit the brochure section.

For an extensive range of uses, HYDRO Stainless is the product specifiers have been waiting for. Practical, attractive, hygienic and ingenious, HYDRO’s Stainless grates and systems are used Australia and New-Zealand wide alongside pools, in kitchens, bathrooms, in landscaping and healthcare.

With an abundance of uses, HYDRO Stainless systems are durable, strong and corrosion resistant, due to use of a high-quality #304 grade steel and marine grade #316 stainless steel. With a constant depth and three different sloped or non-sloped fall options, Hydro Construction’s range in bespoke options is virtually limitless.

Finish options are available in textured R12 finish, a ‘bathroom specific’ finish, electropolish and SureGrip safety finish, according to client needs and the project budget. With over 12 years of industry knowledge and experience, Hydro Construction is happy to suggest a fit-for-purpose system for your next project, informed by a considered analysis.

Waterproofing and easy installation are simply par-for-the-course in Hydro Construction’s Stainless product design. With optional membrane flanges and weep-holes which can be incorporated into drainage solutions, the design is fully customisable and waterproof, with fysch plate joins that are caulked on-site. For easy installation, mitres and carious outlet options are available to be fabricated in-workshop.

DEFLECTA® DEPEL is an aqueous resin silicante water repellent that seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

DEFLECTA® DEPEL is a hydrophobic water repellent that provides a hard wearing breathable barrier to the surface. It works to keep the surface clean while preserving the natural appearance of the treated material.

Buildings that have been discoloured by surface parasites, treated with DEFLECTA® DEPEL reform to the natural appearance.

This product can be used in hospitals, aged and child care, animal husbandry, schools, sports centres, equine facilities, cattery and dog kennels, basements, carparks, food processing and manufacturing.

DEFLECTA® DEPEL will retard efflorescence and its application resists cracking on both horizontal and vertical surfaces while enhancing surface traction.

Product Benefits

  • Waterproofs surface
  • Improves traction
  • No product leaching
  • Retards Efflorescence
  • Abrasion resistant
  • Prevents surface dusting
  • No visual change to surface
  • UV & weather resistant
  • Zero VOC/VOS* content
  • Water based and non-toxic
  • 100% bio-degradable
  • Easy application
  • Easy maintenance

The Aquastop Waterstop is a flexible rubber waterstop to be used to seal joints in construction and also precast panels. The Aquastop upon installation expands on contact with water. Aquastop consists of tightly packed charged microscopic platelets. Between and within these platelets there is a separation of positive and negative charges. Water molecules are attracted to the unique clay structure of positive and negative charges and wedge themselves between the platelets causing them to separate & swell. The hydrated bentonite forms a seal preventing further migration of water. As hydrostatic pressure is increased the platelets compact forming a tighter seal. The lightweight coils are easy to install, durable, non toxic and permanently active.

An acrylic-cement based, grey, flexible, waterproofing membrane, Dampfast prevents surface water penetration. It enables a convenient installation process as it supplants the need for a reinforcement layer, can be applied easily with a damp brush or roller, and can be cured in approximately 6 hours 20°C, saving time and making it possible to tile on the same day. Dampfast is perfect for waterproofing shower recesses, laundries, terraces, balconies, concrete roofs, water tanks, cement toppings and even planter boxes. Dampfast can also be used in tanks – where conventional acrylic membranes would fail. It thus suits water tanks, fishponds and planter boxes.

The Tremproof 3300 is waterproofing membrane which consists of a cold applied sheet. This is based upon a strong, high density, cross laminated polyethylene film and a self adhering SBS bitumen compound. With a total thickness of 1.5mm this membrane is sure to provide necessary water resistance in retaining walls, plaza decks, balconies, terraces, planter boxes, roofs and tunnels while occupying a minimum of space. Since it is self- adhering it is easy to install. The product is compliance tested to the Australian Standard and is guaranteed.

For splash zone protection of timber piling on marinas, jetties, mooring berths, and piers, the Denso Series 250 timber pile protection system is the ultimate solution. Comprised of a durable heavy duty jacket incorporating foam sealant linings, the system is designed to capture and deprive the Toredo worm of oxygen, thus suffocating it in the splash or tidal zone. It also protects timber piles in marine environments from deterioration due to tidal flows, marine growth, and sea conditions.

Since the original release in 1986, Flo-Cell set a benchmark for sub surface drainage. Flo-Cell is the most advanced geocomposite for sub surface drainage and offers high compressive strength up to 148.58 t/m2, lightweight construction, ease of installation and low cost compared to traditional drainage methods. Removing only excess water, the Flo-Cell features water retention cups which provide optimal moisture conditions for growing media, while functioning as a protective membrane for waterproofing and providing ventilation for concrete slabs which alleviates heat induced stress and cracking. With excellent long term durability, the Atlantis Drainage Cell is resistant to all ground chemicals.

The Atlantis channel system provides permanent underground waterways which restore water quality and recharge the natural environment. The underground Atlantis channel system provides a unique way of working with nature to solve the enormous problems currently associated with open concrete channels. The permeable channel system can be designed to follow inherent contours of the landform and emulate the flow of natural waterways. The design creates vertical flow turbulence and reduces the overall flow velocity, while increasing the self cleansing capacity of the channel bed to create healthy aerobic conditions.

Atlantis Wall Panels are a system of vertical drains which attach onto walls and as such are not only able to drain water but also protect the surface of the wall against water. Atlantis Wall Panels measure 30mm in thickness and feature an unique geo—textile on both sides, thus acting as a cavity which allows for the dissipation of hydrostatic pressure. Atlantis Wall Panels are a permanent and effective way of draing water inconspiciously without compromising the overall design. Atlantis Wall Panels also feature a number of distinguished qualities such as: exceedingly light eight which allow for it to be transportable, high compressive strength which can support loads of up to 100t/m², and rigid construction allowing for easy installation. The Atlantis Wall Panel can also be attached to an Atlantis Strip Filter Pipe which can efficiently collect drain water and release it into discharge point. The Antlantis Wall Panel can be installed in a large range of instances, and as such is a highly effective and economic solution ideal for vertical wall drainging systems.

 

FEATURES

Efficient drainage + protects waterproof membranes + eliminates need for gravel + rigid panels + strong structure + quick and simple installation.

 

SPECIFICATION

1.2m, Measurements: (T)30 x (W) 400 x (H) 1200, Flow Rate: 80 1/min

1.8m (T)30 x (W) 400 x (H) 1800, Flow Rate: 80 1/min

2.4m (T)30 x (W) 400 x (H) 2400, Flow Rate: 80 1/min

1.2 m x 1.2m (T)30 x (W) 1200 x (H) 1200, Flow Rate: 80 1/min

52mm Wall Panel (1.9m), (T) 52 x (W) 260 x (H) 1920, Flow Rate: 142 1/min.

RMS Natural Stone & Ceramics provide a range of sealers and cleaners best suited to install and maintain any tiled surface. The collection of sealers include water-based and solvent solutions that all ensure high stain resistance and long life benefits. RMS also supplies a large range of cleaners include a heavy duty alkaline cleaner and a sealer stripper.

Tech-Dry’s EARTHAID by Ace Waterproofing is a water repellent admixture that helps retain the visual integrity of earth renders through good surface beading and low water absorption.  The admixture is used in Tech-dry’s earth render system and is part of Ace waterproofing’s innovative range of earth building protection products for Australia.  By providing early water repellence, EARTHAID also prevents wash-down due to rain or dew contacting the render before it cures.  EARTHAID is ideal for commercial and domestic applications. 

FEATURES 

Water repellent admixture to Tech-Dry earth render system  +  Significantly reduces water penetration  +  Provides good surface beading  +  Early water repellency protects renders before it cures

Pin It on Pinterest