roofing

Showing 1–16 of 51 results

SunSky profiled polycarbonate sheeting from Palram is a roofing material offering superior physical properties.

It is favoured for noncorrosive industrial, structural roofing and sliding as well as by homeowners for a multitude of in-house applications. It also offers high strength and a wide temperature range. Resistance to corrosion and a self extinguishing capability make SunSky suitable for uses as versatile as industrial roofing and siding, architectural skylights, and awnings.

The virtually unbreakable polycarbonate sheet allows a high degree of light transmission while filtering over 99% of UV radiation, and is resistant to both hail and wind. Easily and safely installed and supplied with a ten year warranty, the SunSky is the optimum product selection for industrial and residential projects alike.

Main features and benefits:

  • Virtually unbreakable
  • Self-extinguishing
  • Maintains high light transmission
  • Makes for an ideal alternative to other materials
  • Wide temperature range -50°C to 120°C
  • Easily installation
  • Lifetime warranty
  • Hail and wind resistant
  • Filters over 99% of UV radiation

Suitable applications:

  • Architectural roofing and skylights
  • Skylights and sidelights for metal roofs and walls
  • Residential roofing, pergolas, canopies
  • Light roofing and awnings

SunSky is available in a wide array of colours and an unlimited range of profiles allowing it to integrate as a high quality roof light into any roofing profile.

SUNLITE has a cellular polycarbonate structure that yields a lightweight sheet with high impact strength and superior thermal insulation.

High light transmission makes SUNLITE ideal for varied roofing, wall cladding, and glazing applications.

Interior designers and advertisers take advantage of SUNLITE’s special appearance and add a unique touch to their designs.

The SUNLITE product range includes heat-blocking SolarSmart™ sheets that reduce heat build-up and anti-condensation treatment for greenhouses and garden centres.

Main benefits:

  • High thermal insulation
  • Extremely Lightweight yet impact resistant
  • High light transmission
  • Excellent structural durability
  • Weather and UV resistant
  • Blocks virtually all UV radiation
  • Easy to handle and install
  • High fire ratings

Typical Applications:

  • Architectural roofing and glazing
  • Skylights and sidelights
  • Conservatory roofing
  • Covered walkways
  • Illuminated signage and displays
  • Decorative partitions
  • Greenhouse and garden centre roofing

COLORBOND® steel launches Matt collection in five colours

Harnessing new paint technology to deliver a naturally inspired finish that diffuses light for a soft, textured, designer look, COLORBOND® steel Matt is available in Surfmist® Matt, Shale Grey™ Matt, Dune® Matt, Basalt® Matt and Monument® Matt

Tested for over a decade, COLORBOND® steel Matt has been designed for Australian conditions. The result is a product which maintains its Matt finish, looking even better for longer. COLORBOND® steel Matt is also manufactured in Australia and is compliant with relevant Australian Standards.

COLORBOND® steel Matt incorporates BlueScope’s unique Thermatech® solar reflectance technology. It also benefits from BlueScope’s industry leading metallic coating incorporating Activate® technology to provide enhanced corrosion resistance.

COLORBOND® steel is an ideal building material for a range of building applications that demand good looks and design flexibility. Its applications range from roofing, walling, guttering and downpipes to fencing, patios, sheds and garage doors used in residential, comm

The Designer Solar Roof

Tractile is the designer solar roof. It provides a 4-in-1 combination of composite roof tile, electricity, hot water and insulation in an appealing, seamlessly integrated package.

Tractile's combination of patented interlocking tiles, high performance composite materials and solar technology, create sleek roofing solutions that offer superior design flexibility, durability, appeal and sustainability.
The multi award-winning Tractile Roof is designed in Australia and uses world-class technology and manufacturing processes to create our leading-edge roofing system.

Tractile outperforms traditional roofing products. It is rated for 300kmh winds, resistant to tennis-ball sized hail, is lightweight, has BAL-40 bushfire rating, is more sustainable than concrete or metal roofs, requires little maintenance and it comes with a 30-year warranty.
For astute home builders, designers and developers wanting and innovative sustainable solution, Tractile delivers street appeal combined with the income generating roof of the future.

Available: here

The Designer Solar Roof

Tractile is the designer solar roof. It provides a 4-in-1 combination of composite roof tile, electricity, hot water and insulation in an appealing, seamlessly integrated package.

Tractile's combination of patented interlocking tiles, high performance composite materials and solar technology, create sleek roofing solutions that offer superior design flexibility, durability, appeal and sustainability. The multi award-winning Tractile Roof is designed in Australia and uses world-class technology and manufacturing processes to create our leading-edge roofing system.

Tractile outperforms traditional roofing products. It is rated for 300kmh winds, resistant to tennis-ball sized hail, is lightweight, has BAL-40 bushfire rating, is more sustainable than concrete or metal roofs, requires little maintenance and it comes with a 30-year warranty.
For astute home builders, designers and developers wanting an innovative, sustainable solution, Tractile delivers street appeal combined with the income generating roof of the future.

Available: here

ARCPANEL CUSTOM PANEL – The all in one, straight, curved and multi-curved innovative roofing solution!

The complete sustainable roofing solution that’s quick and easy to install.

Fully Integrated Roofing Systems:
ARCPANEL Custom Panel system combines aesthetic, innovative design, with high strength, durability and excellent thermal insulation. ARCPANEL Custom Panels can also be curved to produce an outstanding architectural feature and provide increased interior space. Custom Panels can achieve significant cantilevers, in some applications up to 50% of the actual back span and this unique system eliminates the need for complex, expensive roof structures. The lightweight Custom Panels are easily handled on site, achieving faster, lower cost installation.

Unique Design & Construction:
ARCPANEL Custom Panel system pre-fabrication starts with a Corrugated topside and Corrugated underside Colorbond steel sheeting, bonded to both sides of a profiled fire-retardant EPS-FR insulation core. The Custom Panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R1.7 to R6.5 can easily be achieved. The strength of this construction means that the Custom Panel system is suitable for use in cyclonic conditions. Since the Custom Panels are fixed in place, there is virtually no maintenance required other than the occasional wash down of soffits. Straight, bullnose, curved and multi-curved panels can be manufactured using Colorbond steel, Colorbond Ultra, Stainless Steel, Zincalume and special Xtreme material finish.

On-site time spent fitting trusses, have linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Custom Panel systems.

Suitable for residential, commercial, stadiums, sports & recreational, amenity & walkways, schools and daycare project applications.

Key Features and Benefits:

– Achieve up to 12.5m unsupported spans can reduce expensive support structures, roof trusses & beams
– Suitable for use in cyclonic wind conditions
– NCC/BCA CodeMark certified product for compliance peace of mind
– Fire Rated to NCC/BCA Group 1
– Roof and wall lining material
– Suitable for Bush Fire Prone Areas – up to BAL29
– Straight, bullnose, curved and multi-curved configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R6.5 are achieved using the Custom Panel
– Dependant on the design, cantilevers of up to 50% the actual backspan can be achieved
– Rapid installation makes the Custom Panel system a clear winner over traditional roof construction
– Pre-finished top and bottom sheet – extensive range of Colorbond steel colours available, Colorbond Ultra,
– Stainless Steel, Zincalume and special Xtreme material finish

 

ARCPANEL SMARTEK PANEL – Combines contemporary design, high strength & durability

The complete sustainable, highly durable prefabricated roofing and wall cladding solution that’s quick and easy to install.

Fully Integrated Roof and Wall Cladding System
ARCPANEL Smartek Panels combine aesthetic, innovative design, with high strength, durability, thermal insulation and have exceptional spans available for roof pitches as low as 2 degrees. Smartek Panels can be in straight and large curved panel configurations to produce an outstanding architectural feature and provide increased interior space. The Smartek Panels can achieve significant cantilevers, in some applications up to 40% the actual back span and this unique system eliminates the need for complex, expensive roof structures. The lightweight ARCPANEL Smartek Panels are easily handled on site, achieving faster and lower cost installation and construction.

Unique Design & Construction
ARCPANEL Smartek Panel pre-fabrication starts with a contemporary looking trapezoidal profile high-quality Colorbond steel on the top and bottom sheets, both bonded to a profiled fire-retardant EPS-FR insulation core. The panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R2.4 to R4.8 can easily be achieved. After the panels are fixed in place, there is virtually no maintenance required other than the occasional wash down. On-site time spent fitting trusses, have linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Smartek Panel system.

Key Features and Benefits:

– Available panel thickness: 100mm, 125mm, 140mm, 175mm and 200mm
– Achieve up to 10.2m unsupported spans can reduce expensive support structures, roof trusses & beams
– NCC/BCA certified product for compliance peace of mind
– Straight and large curved panel configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R4.8 are achieved
– Dependant on the design, cantilevers of up to 40% the actual backspan can be achieved
– Rapid installation makes the Smartek Panel system a clear winner over traditional roof construction
– Pre-finished top sheet – extensive range of Colorbond steel colours available, Colorbond Ultra, Zincalume finish

For further information call us 1300 200 004, email us [email protected] or visit us arcpanel.com.au

ARCPANEL FIRETEK PANEL – Outstanding bushfire attack resistance (BAL40) for roofing applications.

The complete sustainable, highly durable BAL40 tested roofing solution that’s quick and easy to install.

Fully Integrated Roof System
ARCPANEL Firetek Panel combines aesthetic, innovative design, with high strength, durability and excellent bushfire attack protection. ARCPANEL Firetek Panels can be in straight and curved panel configurations to produce an outstanding architectural feature and provide increased interior space. The Firetek Panel can achieve significant cantilevers, in some applications up to 40% the actual back span and this unique system eliminate the need for complex, expensive roof structures. The lightweight ARCPANEL Firetek Panels are easily handled on site, achieving faster and lower cost installation and construction.

In response to mandatory bushfire attack level ratings, ARCPANEL is proud to introduce its new Firetek Panel system which has excellent thermal insulation and is especially suitable for use in bushfire prone areas up to BAL40.

Unique Design & Construction
ARCPANEL Firetek Panel pre-fabrication starts with high-quality Colorbond steel on the top and bottom sheets, both bonded to a profiled fire retardant PIR insulation core. The panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R3.4 to R6.6 can easily be achieved. The top sheet roof profile is available in Trimdek (suitable from 2 degree roof pitch) or Corrugated (suitable from 5 degree roof pitch) profiles. After the panels are fixed in place, there is virtually no maintenance required other than the occasional wash down. On site time spent fitting trusses, eave linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Firetek Panel system.

Key Features and Benefits:
– BAL 40
– Tested for Bushfire and Fire Resistance (AS3959 – 2009)
– Available panel thickness: 85mm, 105mm, 125mm and 150mm
– Achieve up to 9m unsupported spans can reduce expensive support structures, roof trusses & beams
– NCC/BCA certified product for compliance peace of mind
– Straight and curved panel configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R6.6 are achieved
– Dependant on the design, cantilevers of up to 40% the actual backspan can be achieved
– Rapid installation makes the Firetek Panel system a clear winner over traditional roof construction
– Pre-finished top sheet
– extensive range of Colorbond steel colours available, Colorbond Ultra, Zincalume and special Xtreme material finish

For further information call us 1300 200 004, email us [email protected] or visit us arcpanel.com.au

 

The complete sustainable roofing solution that’s quick and easy to install.

Fully Integrated Roofing Systems:
ARCPANEL Ecotek Panel system combines aesthetic, innovative design, with high strength, durability and excellent thermal insulation. ARCPANEL Ecotek Panels can also be curved to produce an outstanding architectural feature and provide increased interior space. Ecotek Panels can achieve significant cantilevers, in some applications up to 40% of the actual back span and this unique system eliminates the need for complex, expensive roof structures. The lightweight Ecotek Panels are easily handled on site, achieving faster, lower cost installation.

Unique Design & Construction:
ARCPANEL Ecotek Panel system pre-fabrication starts with a Trimdek topside and Corrugated underside Colorbond steel sheeting, bonded to both sides of a profiled fire-retardant EPS-FR insulation core. The Ecotek Panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R1.7 to R6.1 can easily be achieved. The strength of this construction means that the Ecotek Panel system is suitable for use in cyclonic conditions. After the Ecotek Panels are fixed in place, there is virtually no maintenance required other than the occasional wash down of soffits. Straight, large curved panels can be manufactured using Colorbond steel, Colorbond Ultra, Stainless Steel, Zincalume and special Xtreme material finish.

On-site time spent fitting trusses, have linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Ecotek Panel systems.

Suitable for residential, commercial, stadiums, sports & recreational, amenity & walkways, schools and daycare project applications.

Key Features and Benefits:

– Achieve up to 12.0m unsupported spans can reduce expensive support structures, roof trusses & beams
– Suitable for use in cyclonic wind conditions
– NCC/BCA CodeMark certified product for compliance peace of mind
– Fire Rated to NCC/BCA Group 1
– Roof and wall lining material – Suitable for Bush Fire Prone Areas
– up to BAL29
– Straight, bullnose, curved and multi-curved configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R6.1 are achieved using the Custom Panel
– Dependant on the design, cantilevers of up to 40% the actual backspan can be achieved
– Rapid installation makes the Custom Panel system a clear winner over traditional roof construction
– Pre-finished top and bottom sheet
– extensive range of Colorbond steel colours available, Colorbond Ultra,
– Stainless Steel, Zincalume and special Xtreme material finish

For further information call us 1300 200 004, email us [email protected] or visit us arcpanel.com.au

A roof made from COLORBOND® steel makes perfect sense

Strong, secure and energy smart, COLORBOND® steel is tried and tested in Australian conditions to look great and deliver outstanding, long life performance. With 22 colours in the range, you can choose a roof colour that sets the theme for your whole home, or complements your other building material choices. In particular, you can ‘mix and match’ colours with your gutter, fascia and downpipes made from COLORBOND® steel. Furthermore, the range of thermally efficient light colours can help to keep your home cooler on hot, sunny days.

Adapting to the demands of the building market, COLORBOND® steel has changed a great deal since its introduction in Australia in 1966. Not only has the colour range evolved, so too has the technology involved in COLORBOND® steel’s production. The most recent innovation, ACTIVATE® technology was introduced in 2013 and BlueScope holds numerous patents on the technology, both in Australia and around the world. No wonder we’re now seeing COLORBOND® steel being used on roofs for anything from homes all around Australia, to large commercial buildings like the Adelaide Velodrome and the Margaret Court Arena.

Premier Slate are suppliers of a breathable membrane known as Permo air. It is the most breathable air open low resistance underlay on the market. Permo air is the ideal solution in areas where there is a high risk of condensation forming in the roofspace, especially useful for humid conditions.

Product features & benefits:

  • Air open & vapour permeable
  • Over 13% more breathable than any other ‘air open’ underlay on the market
  • Lowest vapour resistance of all breathable membranes
  • Being both air open & vapour permeable further minimises the risk of condensation forming
  • No ventilation required
  • Strong 3 layer material
  • Superior nail tear strength

MiTek’s ExtraHeavy HiLoad Girder Bracket secures heavily loaded trusses, like truncated girder and secondary girder trusses to primary girder trusses. It will support trusses 35mm to 90mm thick and is suitable for girder truss bottom chords of 130mm and deeper. The ExtraHeavy HiLoad Girder Bracket has a long cleat to prevent the twisting of the bottom chord of the girder truss. Plus, the supported truss can be located on either side of the cleat, making the location of the bracket much simpler. The cleat also has a cut away section, which avoids the possibility of interference with ceiling linings.

MiTek’s ExtraHeavy HiLoad Girder Bracket is an Engineered Building Product. It has been designed and manufactured in accordance with ISO 9001 and meets all the requirements of the National Code Series and Australian Standards. Installation instructions, including product specifications, can be found in the MiTek ExtraHeavy HiLoad Girder Bracket data sheet. This can be accessed via the free MiTek EasyCat App or downloaded from the MiTek website: mitek.com.au

Remember: always specify and use Engineered Building Products.

The MiTek JoistStrap is used to fix ceiling joists to hanging beams. A built-in locator nail ensures the JoistStrap can be easily positioned and attached to a member prior to final nailing. For maximum performance, fix with MiTek 30 x 2.8mm hot dipped, galvanized reinforced head nails or a combination of MiTek nails and MSA1430 screws.

The MiTek JoistStrap is an Engineered Building Product. It has been designed and manufactured in accordance with ISO 9001 and meets all the requirements of the National Code Series and Australian Standards. Installation instructions, including product specifications, can be found in the MiTek JoistStrap data sheet. This can be accessed via the free MiTek EasyCat App or downloaded from the MiTek website: mitek.com.au

Remember: always specify and use Engineered Building Products.

MiTek CycloneTies are used to fix purlins, rafters and trusses to top plates and timber lintels in areas subject to cyclonic and high wind conditions. CycloneTies are available in 180mm, 400mm, 600mm, 900mm and 1200mm lengths. All have pre-bent legs for quick installation and pre-punched holes for easy fixing. For maximum performance, fix with MiTek 30 x 2.8mm hot dipped galvanized reinforced head nails.

MiTek CycloneTies are an Engineered Building Product. They have been designed and manufactured in accordance with ISO 9001 and meet all the requirements of the National Code Series and Australian Standards. Installation instructions, including product specifications, can be found in the MiTek CycloneTie data sheet. This can be accessed via the free MiTek EasyCat App or downloaded from the MiTek website: mitek.com.au

Remember: always specify and use Engineered Building Products.

MiTek’s BraceWall Bracket connects the ceiling diaphragm to the top of non-load bearing walls and enables lateral loads to be distributed into bracing walls in accordance with AS1684.2 and AS1684.3 “Residential Timber-Framed Construction” clause 8.3.6.9 and AS1684.4 clause 8.3.2.8. Each BraceWall Bracket replaces a pair of timber shear blocks. It also acts simultaneously as an Internal Wall Bracket and is faster and easier to install than timber shear blocks.

MiTek’s BraceWall Bracket is an Engineered Building Product. It has been designed and manufactured in accordance with ISO 9001 and meets all the requirements of the National Code Series and Australian Standards. Installation instructions, including product specifications, can be found in the MiTek BraceWall Bracket data sheet. This can be accessed via the free MiTek EasyCat App or downloaded from the MiTek website: mitek.com.au

Remember: always specify and use Engineered Building Products.

MiTek’s Concealed Purlin Cleat is an economical (hidden) bracket for fixing purlins to the top of rafters, or trusses to the top of walls to resist wind uplift. They provide a fast and easy method of anchoring purlins, rafters and trusses to the top supports away from view. Concealed Purlin Cleats are also useful for fixing timber plates on top of block walls. MiTek recommends installers use only MiTek MSA1430 or MSA1465 screws.

MiTek’s Concealed Purlin Cleat is an Engineered Building Product. It has been designed and manufactured in accordance with ISO 9001 and meets all the requirements of the National Code Series and Australian Standards. Installation instructions, including product specifications, can be found in the Concealed Purlin Cleat data sheet. This can be accessed via the free MiTek EasyCat App or downloaded from the MiTek website: mitek.com.au

Remember: always specify and use Engineered Building Products.

Pin It on Pinterest