Sealants + Adhesives

Showing 1–16 of 59 results

GTEK™ manufactures a complete range of Joint Compounds including Base Coat, Top Coat and All Purpose Lightweight. Complementing our jointing range is our range of Cornice Cements for bonding cornice to plasterboard walls and ceilings and Stud Adhesive and Masonry Adhesive for bonding plasterboard to stud and masonry walls.

DEFLECTA® HEALTH SEAL is a clear formulation for the protection of concrete surfaces prior to the installation of floor finishes.

Deflecta® HEALTH SEAL is applied to seal the surface of concrete to prevent ingress of body fluids in areas such as hospitals, aged and child care, health facilities and schools and sport facilities.

Product Benefits

  • Surface sealer
  • 100% bio-degradable
  • Water based and non-toxic formulation
  • Prevents urine ingress
  • Prevents body fluid penetration of sub-floor
  • Excellent pre-treatment for floor finishes
  • Zero VOC/VOS* content

Deflecta® Topel™ is an inorganic silicon-containing material; concrete treatment that increases both density and surface hardness, is hydrophobic – providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete increasing abrasive resistance and damage from water. DEFLECTA® TOPELwill not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab:

  • Topel’s function creates a hydrophobic slip resistant surface.

DEFLECTA® TOPEL can be applied to both interior or exterior concrete slabs in areas such as car parks, stairs and landing, driveways, paving and ramps, but not limited to.

Product Benefits:

  • Hydrophobic
  • Increased slip resistant surface
  • Prevents surface dusting
  • Increases abrasion resistance and durability
  • Low Volatile Organic Compounds / Volatile Organic Solvents
  • Easy application
  • Biodegradable water based
  • Easy maintenance
  • High coverage rate

DEFLECTA® TOPEL Test Results:-

  1. Slip Resistance Classification P4 – Wet Result
  2. Water Contact Angle Classification – Super Hydrophobic > than 120o

Watch Video

DEFLECTA® DEPEL is an aqueous resin silicante water repellent that seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

DEFLECTA® DEPEL is a hydrophobic water repellent that provides a hard wearing breathable barrier to the surface. It works to keep the surface clean while preserving the natural appearance of the treated material.

Buildings that have been discoloured by surface parasites, treated with DEFLECTA® DEPEL reform to the natural appearance.

This product can be used in hospitals, aged and child care, animal husbandry, schools, sports centres, equine facilities, cattery and dog kennels, basements, carparks, food processing and manufacturing.

DEFLECTA® DEPEL will retard efflorescence and its application resists cracking on both horizontal and vertical surfaces while enhancing surface traction.

Product Benefits

  • Waterproofs surface
  • Improves traction
  • No product leaching
  • Retards Efflorescence
  • Abrasion resistant
  • Prevents surface dusting
  • No visual change to surface
  • UV & weather resistant
  • Zero VOC/VOS* content
  • Water based and non-toxic
  • 100% bio-degradable
  • Easy application
  • Easy maintenance

DEFLECTA® BOTANY will suppress the growth of mould, mildew and fungi and reduce build-up of surface dirt and soiling over time on; grout, cemetitious material and concrete to most wet areas of high humidity and moisture ie; in particular shower, kitchens, laundries, bathrooms, food processing and warehouses. The product works at keeping the surface clean while preserving the natural appearance. Supports company/consumer hygiene requirements that reduces the vigorous cleaning protocols in both frequency and the cost of commercial grade cleaning products.

This product can be used in hospitals, aged and child care, animal husbandry, schools, sports centres, equine facilities, cattery and dog kennels, basements, carparks, food processing and manufacturing, cool rooms and freezers, warehouses, inside wall and ceilings, outside walls, bathrooms and toilet blocks – and assists in high infection control protocols.

Product Benefits

  • Suppresses mould, mildew and fungi growth
  • Prevents urine ingress
  • Sanitises and Seals the surface
  • Water repellent
  • Improves traction
  • Abrasion resistant
  • Prevents surface dusting
  • Zero VOC/VOS* content
  • Water based and non-toxic formulation
  • 100% biodegradable
  • Easy application
  • Easy maintenance

Kiesel’s versatile range of surface preparation products provide extremely fast setting characteristics with outstanding work-ability and a reliable performance even under the most demanding circumstances, all with very low VOC emissions.

Polyflor’s Kiesel Okatmos EG 20 Fast Setting Primer is part of a new range of primers, screeds and adhesives suitable for Polyflor’s variety of flooring solutions. Okatmos EG 20 dries quickly, is solvent free and features low emissions which makes it perfect for one-day installations in new and old indoor spaces. The primer is for absorbent and non-absorbent substrates and can be diluted with water on concrete substrates.

Kiesel Okapox GF is a solvent and water free, very low emission thin two-component epoxy primer for the preparation of absorbing and non-absorbing substrates before patching, sealing and floor installation. Suitable for a wide variety of materials, Okapox GF provides a high flexural strength, adhesive strength, compressive strength and abrasion resistance, resists water, lye, acids, salt water as well as grease and fuel. It can be use as moisture barrier on cement based substrates and can be used as binder for epoxy mortars.

Kiesel Okatmos DSG is a solvent-free, sanitising moisture barrier and primer with a high bond strength for well-prepared substrates. It is for use on absorbent and non-absorbent substrates before levelling, sealing, thin-bed tile installation or the installation of textile/flexible floor surfaces and parquet/engineered wood flooring. Okatmos DSG can be used as moisture controlled dispersion primer on cementitious substrates such as cement screeds or concrete barrier against excessive moisture.

Okatmos antimicrobial flooring systems adhesives combine unsurpassed adhesive strength with superlative workability, excellent coverage, and the best possible protection of the health of the installer and end user with ‘very low’ VOC emissions.

The Okatmos range of adhesives includes:

Though all Ciment products are naturally of a low porosity, they should be sealed in order to prevent staining, particularly if used in an area proximal to food preparation.

Boss Architectural offers pre factory sealing with CimentShield, a high quality solvent-based pre sealer that is applied, burnished, and then wrapped in protective plastic film. Post installation, Ciment undergoes a second sealing by the stonemason or fabricator to ensure maximum protection from staining.

Boss Architectural also supplies each slab and tile with a bottle of Ciment Spray and Wipe and Shield for ongoing maintenance included.

Years of experience have proven that the adhesive, gun and sealant we recommend are best on the market to achieve the most professional installation possible.

To be used for general purpose glazing and curtain walls, the Pasco Hypersil 911 is a high performance neutral cure silicone sealant which cures to form a tough and flexible waterproof seal. Formulated for a wide range of glazing, weatherproofing and specialist trade applications. It has an un-offensive odor, is easy to apply and tool and is made of 100 % silicone, meaning it is also durable, adhesive and non corrosive. An excellent glazing tool in diverse climatic conditions.

Svenic is Australasia’s leading supplier of quality Sealant and Adhesive Application Equipment. All applicators are manufactured to high levels of quality control. This top of the range Hand Operated Barrel Applicator has features which are appealing to a professional, such as a 50mm diameter barrel, easy trigger action, and a 37cm and 45cm standard barrel length. The applicator can be adapted for use with cartridges, sachets, bulk and pouring grade resins, epoxies, sealants and adhesives. Parts such as springs, catch plate and thumb release plate are replaceable. A follower plate or Bulk Gun Filler is recommended when using bulk material from a pail.

CRYST-O-SEAL is a concentrated, strong, waterproofing slurry cement which provides excellent protection. With its unique chemistry of graded quartz and active chemicals it enables crystallisation to both sides of the substrate. It comes is easy to use fine, grey powder, requiring only added water. The material with coat concrete or cement surfaces against water influx, dampness and ground water. The ease of use means it is an economical and efficient solution for the creation of a waterproof barrier on concrete, cement, plaster and cement brick for the fortification of foundations, basements, tunnels, retaining walls, dams, ponds, pools, silos and sewerage plants.

An acrylic-cement based, grey, flexible, waterproofing membrane, Dampfast prevents surface water penetration. It enables a convenient installation process as it supplants the need for a reinforcement layer, can be applied easily with a damp brush or roller, and can be cured in approximately 6 hours 20°C, saving time and making it possible to tile on the same day. Dampfast is perfect for waterproofing shower recesses, laundries, terraces, balconies, concrete roofs, water tanks, cement toppings and even planter boxes. Dampfast can also be used in tanks – where conventional acrylic membranes would fail. It thus suits water tanks, fishponds and planter boxes.

NuLife Stone Care provides a complete service in premium stone sealing techniques, to restore and revive, as well as to protect and enhance, existing masonry. NuLife Stoneware applies impregnating silicone or petro-based substances to surfaces, products which have a unique ability to be absorbed into stone without blocking stone pores. This protects and seals masonry surfaces, while still allowing stone to breathe and transmit moisture.

For splash zone protection of timber piling on marinas, jetties, mooring berths, and piers, the Denso Series 250 timber pile protection system is the ultimate solution. Comprised of a durable heavy duty jacket incorporating foam sealant linings, the system is designed to capture and deprive the Toredo worm of oxygen, thus suffocating it in the splash or tidal zone. It also protects timber piles in marine environments from deterioration due to tidal flows, marine growth, and sea conditions.

Astec Paints offers the ultimate in sealing and binding performance in its Rivett protective finish. The clear, solvent-based solution is designed to penetrate the substrate of a surface, the product permeates chalky paint, unsound masonry, and asbestos sheeting, to bind loose surface particles to an extremely hard and smooth surface. The product is also an extremely effective waterproofing solution, and can be applied for this purpose to timber, masonry and compressed sheeting. 

Pin It on Pinterest