Material Treatments

Showing 1–16 of 76 results

DEFLECTA® HEALTH SEAL is a clear formulation for the protection of concrete surfaces prior to the installation of floor finishes.

Deflecta® HEALTH SEAL is applied to seal the surface of concrete to prevent ingress of body fluids in areas such as hospitals, aged and child care, health facilities and schools and sport facilities.

Product Benefits

  • Surface sealer
  • 100% bio-degradable
  • Water based and non-toxic formulation
  • Prevents urine ingress
  • Prevents body fluid penetration of sub-floor
  • Excellent pre-treatment for floor finishes
  • Zero VOC/VOS* content

Power Clean is the ideal solution for removing old treatments, sealants and weathered oil-based finishes when preparing your deck.

The use of Quantum Dex Prep Solution after the instructed cleaning process is advised to neutralise the timber and rid the surface of any darkening or unwanted discolouration which may occur in the cleaning process. For the removal of tannins from the timber, Quantum Sap-Strip is recommended instead.

Power Clean is not a paint or varnish stripper and can be safely used on any timber surface.

Eco Dex is a decking finish that is fast-drying and durable, designed to intensely hydrate and naturally protect your timber deck from the harsh Australian environment.

A pre-coat application of Quantum SapStrip is recommended for optimum results. Eco Dex is available in three sizes (1 litre, 4 litre and 10 litre) and is suitable for most timbers.

Deflecta® Topel™ is an inorganic silicon-containing material; concrete treatment that increases both density and surface hardness, is hydrophobic – providing increased wear and slip resistance. This product is a densifier that penetrates and bonds with the Portland cement components of the concrete increasing abrasive resistance and damage from water. DEFLECTA® TOPELwill not alter the appearance of the concrete when applied. However, with time and wear, the slab will improve its appearance compared to an untreated slab:

  • Topel’s function creates a hydrophobic slip resistant surface.

DEFLECTA® TOPEL can be applied to both interior or exterior concrete slabs in areas such as car parks, stairs and landing, driveways, paving and ramps, but not limited to.

Product Benefits:

  • Hydrophobic
  • Increased slip resistant surface
  • Prevents surface dusting
  • Increases abrasion resistance and durability
  • Low Volatile Organic Compounds / Volatile Organic Solvents
  • Easy application
  • Biodegradable water based
  • Easy maintenance
  • High coverage rate

DEFLECTA® TOPEL Test Results:-

  1. Slip Resistance Classification P4 – Wet Result
  2. Water Contact Angle Classification – Super Hydrophobic > than 120o

Watch Video

DEFLECTA® DEPEL is an aqueous resin silicante water repellent that seals and preserves natural stone, brick, slate, masonry and precast concrete for internal and external surfaces.

DEFLECTA® DEPEL is a hydrophobic water repellent that provides a hard wearing breathable barrier to the surface. It works to keep the surface clean while preserving the natural appearance of the treated material.

Buildings that have been discoloured by surface parasites, treated with DEFLECTA® DEPEL reform to the natural appearance.

This product can be used in hospitals, aged and child care, animal husbandry, schools, sports centres, equine facilities, cattery and dog kennels, basements, carparks, food processing and manufacturing.

DEFLECTA® DEPEL will retard efflorescence and its application resists cracking on both horizontal and vertical surfaces while enhancing surface traction.

Product Benefits

  • Waterproofs surface
  • Improves traction
  • No product leaching
  • Retards Efflorescence
  • Abrasion resistant
  • Prevents surface dusting
  • No visual change to surface
  • UV & weather resistant
  • Zero VOC/VOS* content
  • Water based and non-toxic
  • 100% bio-degradable
  • Easy application
  • Easy maintenance

DEFLECTA® BOTANY will suppress the growth of mould, mildew and fungi and reduce build-up of surface dirt and soiling over time on; grout, cemetitious material and concrete to most wet areas of high humidity and moisture ie; in particular shower, kitchens, laundries, bathrooms, food processing and warehouses. The product works at keeping the surface clean while preserving the natural appearance. Supports company/consumer hygiene requirements that reduces the vigorous cleaning protocols in both frequency and the cost of commercial grade cleaning products.

This product can be used in hospitals, aged and child care, animal husbandry, schools, sports centres, equine facilities, cattery and dog kennels, basements, carparks, food processing and manufacturing, cool rooms and freezers, warehouses, inside wall and ceilings, outside walls, bathrooms and toilet blocks – and assists in high infection control protocols.

Product Benefits

  • Suppresses mould, mildew and fungi growth
  • Prevents urine ingress
  • Sanitises and Seals the surface
  • Water repellent
  • Improves traction
  • Abrasion resistant
  • Prevents surface dusting
  • Zero VOC/VOS* content
  • Water based and non-toxic formulation
  • 100% biodegradable
  • Easy application
  • Easy maintenance

Kiesel’s versatile range of surface preparation products provide extremely fast setting characteristics with outstanding work-ability and a reliable performance even under the most demanding circumstances, all with very low VOC emissions.

Polyflor’s Kiesel Okatmos EG 20 Fast Setting Primer is part of a new range of primers, screeds and adhesives suitable for Polyflor’s variety of flooring solutions. Okatmos EG 20 dries quickly, is solvent free and features low emissions which makes it perfect for one-day installations in new and old indoor spaces. The primer is for absorbent and non-absorbent substrates and can be diluted with water on concrete substrates.

Kiesel Okapox GF is a solvent and water free, very low emission thin two-component epoxy primer for the preparation of absorbing and non-absorbing substrates before patching, sealing and floor installation. Suitable for a wide variety of materials, Okapox GF provides a high flexural strength, adhesive strength, compressive strength and abrasion resistance, resists water, lye, acids, salt water as well as grease and fuel. It can be use as moisture barrier on cement based substrates and can be used as binder for epoxy mortars.

Kiesel Okatmos DSG is a solvent-free, sanitising moisture barrier and primer with a high bond strength for well-prepared substrates. It is for use on absorbent and non-absorbent substrates before levelling, sealing, thin-bed tile installation or the installation of textile/flexible floor surfaces and parquet/engineered wood flooring. Okatmos DSG can be used as moisture controlled dispersion primer on cementitious substrates such as cement screeds or concrete barrier against excessive moisture.

MACPrime from Melbourne Acrylic Coatings is an easy to use product that can be applied to ensure the longevity and premium performance of masonry surfaces and walls. The acrylic primer is extremely alkali and water resistant, and can enhance the adhesive performance and life of textures and paints applied to stone. 

Specially formulated for the safe and effective removal of rust from metal surfaces, Rust Remover Gel from Hammerite is ideal for vertical surfaces. Using a unique non-drip formula to remove rust in as little as two hours, the gel will not damage underlying paintwork or surface treatments.

Hammerite’s Rust Remover Gel is suitable for exterior or interior use, and is non toxic and safe to the skin.

For use on heavily pitted areas of rust to prevent the formation of new rust, Hammerite’s No.1 Rust Beater is a long-lasting corrosion resistant product that is quick and easy to apply.

Killing rust whilst acting as a primer and undercoat, the surface treatment can be applied directly to rusted areas or used as an anti-corrosive primer for ferrous materials. Compatible with most top coats and touch dry within 2 hours, the exterior surface treatment is available in black or dark brown, and can be sprayed or applied using a brush. 

Designed for direct application to non-rusting metals such as galvanised steel, aluminium, copper, and brass, Hammerite’s Direct to Galvanised Metal paint combines primer, paint, and top coat in one easy to apply product.

Surfaces treated with the paint require only one coat for long lasting high-gloss protection and are touch dry within 1 to 2 hours, depending on coat thickness. Direct to Galvanised Metal paint provides an even finish for non-ferrous materials in both exterior and interior use, and is available in six contemporary colours. 

Specially formulated to resist corrosion as a result of exposure to chemicals, salt spray, moisture, and extreme temperatures, surface treatments from Fast Blast are tough, durable, and long lasting.

Fast Blast’s high quality industrial grade coatings extend the lifespan of steel components, and draw from over 30 years of industry experience and knowledge with commercial, industrial, and mining products. The company offers a complete treatment solution, from the use of a basic zinc primer to a full paint finish or customised spray treatment. 

For the removal of corrosion deposits and previously applied coatings, abrasive or sand blasting is used to prepare steel for coating, or alternatively as a finishing process.

Suitable for steel items of all sizes, Fast Blast provides abrasive blasting services and equipment, delivering high quality, cost effective, and timely solutions that are compliant with all relevant Australian standards. 

A metallic coloured gloss enamel for metal surfaces, Galmet’s Hammered Metal Finish covers surface imperfections, offering both protection and an attractive dimpled finish.

Suitable for industrial machinery and equipment as well as smaller products such as fences and gates, the enamel is available in three contemporary colours for convenient application using an aerosol. 

Dampfix Gold Grey is an elastomeric, one part, fibre-reinforced water based polyurethane membrane which is also UV stable. It is one of a series of products including also primers and Z Bond Silicone 6S that form a primer system. It is mostly used for domestic applications such as shower recesses, bathrooms, laundries, roofs and decks.

Steel is a widely used and very functional building material commonly used in the construction industry. Steel is very versatile being easy to transport and erect, and is easily recognizable in many of the world’s largest buildings and structures. Along with being very versatile, steel is a leading contributor to sustainability as it can generally be reused or recycled at the end of a building lifespan.

A coating over steel is still the most straightforward and economic way to prevent corrosion. Coatings over steel serve two purposes; to protect the substrate from corrosion and to provide specifiers with the opportunity to select a range of colours and finishes to distinguish their structure.

Choice of applications are between environmentally friendly water based Envirothane Epoxy primers, Polyurethanes and Inflonito Fluoropolymer topcoats, and the same in solvent based Vitrethane Epoxies and Urethanes and Enviroflon FluoropolymerTopcoats.There are two factors involved in steel coating…protection of the steel from rust by the primer and possibly build coat, and the decorative and protective role of the topcoat.

Pin It on Pinterest