Building

Showing 1–16 of 27 results

Suppliers and wholesalers building products and construction materials including brick and block construction, concrete, scaffolding systems and materials, timber construction, cladding materials, products to assist in ventilation and insulation, for domestic, commercial, civil and landscaping applications.

Designed as a modular system to support decking, exterior tiles and turf. The lightweight, aluminium framework is made from moisture ­resistant materials. Easy, fast and low risk to install over membrane, natural ground and concrete.

Key Features

  • The system is a lightweight structural framework made-to-measure by our experienced design team
  • Low profile: height-adjustable framework for low height applications from 40mm to 400mm
  • Designed to support hardwood timbers, composite decking, exterior tiles and synthetic turf ranges using hidden interlocking fastenings
  • Ideal for building exterior spaces over natural ground, concrete slabs and existing tiles or pavers
  • Corrosion resistant marine-grade, anodised, structural aluminium joists and bearers
  • Load capacity of up to 5KN
  • QwickBuild also enables the construction of deck structures including: stairs, seats, screens and curves, that are freestanding with minimal bracing elements
  • Compatible as a highly stable and low profile framework for hardwood timbers
  • Integrates turf, tiles and decking

Dune ceiling tiles provide a durable, fine-textured, non-directional visual with standard acoustical absorption. High Recycled Content (HRC) items contain Ceiling-to-Ceiling high post consumer recycled content from the Armstrong Ceiling Recycling Program. Second Look scored panels and most Dune panels offer HumiGuard+ no sag performance, scratch-resistance, are resistant to surface growth of mould and mildew, and can be recycled at the end of their usable life. Dune ceiling tiles are compatible with standard suspension systems and Axiom perimeter trim. Application areas include offices, education, healthcare, retail and corridors.

BENEFITS
• Good acoustic performance
• Upgraded look at a modest price
• Fine textured surface
• High light reflective finish
• RH99 Humidity Resistant
• Sustainable – Green Star contribution

There are 5 products within this range.
1. Dune
2. Dune Max
3. Dune Plank
4. Dune Second Look
5. Dune Max Planks


The AGS 400 Narrowline framing system has set the standard for centre glazed framing for over two decades. With an aesthetically balanced look and the option of bevelled or square finishes, the AGS 400 Narrowline is the most versatile and adaptable framing system in the range.
 
With a multitude of compatible window and door suites, the AGS 400 Narrowline offers enormous design flexibility making this product ideal for commercial or residential projects that require a bold modern look and high levels of structural performance.
 
Features & Benefits
 
-101.6mm x 44mm centre glazed framing system
-Suits most commercial or architectural applications
-Supports single glazing
-Crisp, narrow unbroken lines for clean aesthetics
-Captive glazing wedge options for easier on-site glazing
-Flexible design with wide range of mullion and transom options
-A wide range of compatible AGS window and door suites


Pre-​wall blocks for walling in and around for single and line mounting.
 
Individual pre-​wall solutions for wet construction with high mounting comfort.
 
The closed, robust box made of EPS saves you walling the interior area. This factory-​installed sound insulation also protects the modules from getting damaged and serves an ideal base for plastering.
 
The closed, robust box made of EPS saves you walling the interior area. This factory-​installed sound insulation also protects the modules from getting damaged and serves an ideal base for plastering.
 
Good adhesion with the brickwork due to integrated wall pockets.
 
Adjustable depth.
 
Line installation is possible using long mounting profile.
 
Pre-​mounted ready for connection.
 
Sound decoupling devices with place for all Viega system wall plates.
 
Tested sound protection in accordance with DN 4109 by the Fraunhofer Institute for Building Physics, Stuttgart.
Sound protection certificates are existing.
 
All sizes are indicated in millimetre.
 
Long-​term availability guarantee.


ARCPANEL FIRETEK PANEL – Outstanding bushfire attack resistance (BAL40) for roofing applications.

The complete sustainable, highly durable BAL40 tested roofing solution that’s quick and easy to install.

Fully Integrated Roof System
ARCPANEL Firetek Panel combines aesthetic, innovative design, with high strength, durability and excellent bushfire attack protection. ARCPANEL Firetek Panels can be in straight and curved panel configurations to produce an outstanding architectural feature and provide increased interior space. The Firetek Panel can achieve significant cantilevers, in some applications up to 40% the actual back span and this unique system eliminate the need for complex, expensive roof structures. The lightweight ARCPANEL Firetek Panels are easily handled on site, achieving faster and lower cost installation and construction.

In response to mandatory bushfire attack level ratings, ARCPANEL is proud to introduce its new Firetek Panel system which has excellent thermal insulation and is especially suitable for use in bushfire prone areas up to BAL40.

Unique Design & Construction
ARCPANEL Firetek Panel pre-fabrication starts with high-quality Colorbond steel on the top and bottom sheets, both bonded to a profiled fire retardant PIR insulation core. The panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R3.4 to R6.6 can easily be achieved. The top sheet roof profile is available in Trimdek (suitable from 2 degree roof pitch) or Corrugated (suitable from 5 degree roof pitch) profiles. After the panels are fixed in place, there is virtually no maintenance required other than the occasional wash down. On site time spent fitting trusses, eave linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Firetek Panel system.

Key Features and Benefits:
– BAL 40
– Tested for Bushfire and Fire Resistance (AS3959 – 2009)
– Available panel thickness: 85mm, 105mm, 125mm and 150mm
– Achieve up to 9m unsupported spans can reduce expensive support structures, roof trusses & beams
– NCC/BCA certified product for compliance peace of mind
– Straight and curved panel configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R6.6 are achieved
– Dependant on the design, cantilevers of up to 40% the actual backspan can be achieved
– Rapid installation makes the Firetek Panel system a clear winner over traditional roof construction
– Pre-finished top sheet
– extensive range of Colorbond steel colours available, Colorbond Ultra, Zincalume and special Xtreme material finish

For further information call us 1300 200 004, email us [email protected] or visit us arcpanel.com.au

 


The complete sustainable roofing solution that’s quick and easy to install.

Fully Integrated Roofing Systems:
ARCPANEL Ecotek Panel system combines aesthetic, innovative design, with high strength, durability and excellent thermal insulation. ARCPANEL Ecotek Panels can also be curved to produce an outstanding architectural feature and provide increased interior space. Ecotek Panels can achieve significant cantilevers, in some applications up to 40% of the actual back span and this unique system eliminates the need for complex, expensive roof structures. The lightweight Ecotek Panels are easily handled on site, achieving faster, lower cost installation.

Unique Design & Construction:
ARCPANEL Ecotek Panel system pre-fabrication starts with a Trimdek topside and Corrugated underside Colorbond steel sheeting, bonded to both sides of a profiled fire-retardant EPS-FR insulation core. The Ecotek Panel yields high strength resulting in large spans and cantilevers along with a high insulation value. Standard ratings from R1.7 to R6.1 can easily be achieved. The strength of this construction means that the Ecotek Panel system is suitable for use in cyclonic conditions. After the Ecotek Panels are fixed in place, there is virtually no maintenance required other than the occasional wash down of soffits. Straight, large curved panels can be manufactured using Colorbond steel, Colorbond Ultra, Stainless Steel, Zincalume and special Xtreme material finish.

On-site time spent fitting trusses, have linings, plasterboard, battens, insulation lining, roof sheeting and painting, is eliminated when using ARCPANEL Ecotek Panel systems.

Suitable for residential, commercial, stadiums, sports & recreational, amenity & walkways, schools and daycare project applications.

Key Features and Benefits:

– Achieve up to 12.0m unsupported spans can reduce expensive support structures, roof trusses & beams
– Suitable for use in cyclonic wind conditions
– NCC/BCA CodeMark certified product for compliance peace of mind
– Fire Rated to NCC/BCA Group 1
– Roof and wall lining material – Suitable for Bush Fire Prone Areas
– up to BAL29
– Straight, bullnose, curved and multi-curved configurations, suitable for most architectural designs
– Superior standard thermal ratings up to R6.1 are achieved using the Custom Panel
– Dependant on the design, cantilevers of up to 40% the actual backspan can be achieved
– Rapid installation makes the Custom Panel system a clear winner over traditional roof construction
– Pre-finished top and bottom sheet
– extensive range of Colorbond steel colours available, Colorbond Ultra,
– Stainless Steel, Zincalume and special Xtreme material finish

For further information call us 1300 200 004, email us [email protected] or visit us arcpanel.com.au


For certain display requirements within workplace and learning spaces the days of LCD panels are numbered. Once you get above a certain screen size LED matrix display takes over. Likewise once you get over a certain brightness level LED display holds a clear advantage.

Sometimes these two attributes are needed at the same time, such as in a daylight filled corporate lobby, large training room or presentation facility. In such instances LCD panels fall well short of the mark and so does projection.  The only thing that will do the job effectively is LED display.

Up until recently, what has held LED display back from dominating such applications has been the tightness of the pixel pitch available in LED product and the considerable cost. Today these formidable stumbling blocks have been largely overcome. LED display is now replacing projection in lecture theatres, theatrettes, large boardrooms and large meeting rooms. With tighter pixel displays, wider viewing angles and with screen dimensions readily scalable for picture perfect results, seamless LED display is winning on all fronts.

So if you’re looking to put an LCD screen, LCD wall or projector into a space, why not check whether there is a viable LED display alternative built for the purpose now available? No one wants technology that may be soon out of date.


Built to Last. For the Builder Who Puts Quality First

In today’s competitive world, there will always be ways to cut corners and save on cost, but the phrase ‘they don’t build them like they used to’ was created for good reason.

The imported structural products on the market are designed to be fit for purpose but they are generally created from soft woods that have a fraction of the nail retention, compression and beauty of GOODWOOD SUPASPAN. These are some of the reasons the best builders prefer SUPASPAN.

Click here for more information.


Unique Character and Maximum Use of Resource – That’s Alpine Oak!

With recent advances in technology, ASH have been able to salvage smaller, character filled pieces of hardwood and create a long, straight product range that reduces the manufacture time for the builder and champions the natural effects of timber – the way its meant to be.

Click here for more information.


As Beautiful as it Is Durable and Guaranteed to Perform – That’s Iron Ash

IRON ASH uses innovative technology to combine a transparent combination of water-based additives deep into the core of GOODWOOD Victorian Ash. Treated to H3 classification, IRON ASH can be used externally in partnership with GOODWOOD Victorian Ash to allow continuous flow of timber design from inside to out. IRON ASH is a great choice to finish any project. It can be easily cut, stained and painted on site. The IRON ASH range offers an affordable timber choice that is stable and readily available.

Click here for more information.


The Market’s Best Appearance Grade Timbers

It is well understood that Victorian Ash is very easy to work, cut, stain and build with, but ASH go much further. GOODWOOD Victorian ash is straight line edged after drying, has minimal pink colouring, is internally scanned for defects and much, much more. ASH's range of options has exploded into all of the timber aspects you need for the internal fit out for this reason. You can find them just about all around Australia, which means the flow of design can carry on throughout your project.

Click here for more information.


For over three decades, DesignBUILD has supported Australia’s architecture, building, construction and design communities, as the leading commercial platform for manufacturers and suppliers to showcase new products and meet key industry buyers and specifiers. DesignBUILD is the only dedicated trade show to bring together Australia’s architects, building professionals, contractors and designer community together with manufacturers, suppliers and service providers who work across the residential and commercial industry sectors, for 3 days of unrivalled networking and inspiration.


Designed as a guide to hold the bottom of walls during concrete pouring, the 110P-G is secured with concrete nails to the slab or footing below. The component is compatible with other products in DCS’ 110mm profile range, and available in a stock length of 3000mm.


The main profile in the 110mm range, the 110P-1 can be installed in either vertical or horizontal orientations, interlocking with a patented ‘snap together’ mechanism for ease, speed, and safety of installation. The 110P-1 is available in custom lengths between 1800mm and 7950mm.


Geometric extrusions by Capral Aluminium are just one of the many expertise alumimium extrusion services offered by the leading Australian aluminium manufacturer.  Capral Aluminium’s flexibile extrusion services include engineering, machine rod, transport, marine, seating, qubelok and scaffolding extrusions, complimented by a substantial library of dies.  Geometric extrusions start from simple geometrical shapes to options for different angles, channels, tubes, tee’s and hollows to provide an extrusion solution for almost all residential, commercial and infrastructural application.


Demolition doesn’t have to mean noise, danger, and environmental impact. Silent Demolition Agent, Bristar, eliminates the need for heavy equipment, jackhammers, and explosives, providing a safer alternative to traditional methods. Simply drill holes in the concrete or rock, apply Bristar, and it goes silently to work, cracking the surface in a predictable manner and time frame. Free from fly rock, dust, noise, and vibrations, Bristar is the perfect license-free solution to your demolition needs.


Pin It on Pinterest