The kitchen bench height is a space beneath a kitchen bench where you can store utensils. A kitchen bench is a counter with a back. It’s part of the kitchen design measurements and overall kitchen dimensions. In Australia, the benchtop height is usually 900mm. This varies greatly on the average height of the person.
Floor cabinet height can certainly affect how freely you move around your kitchen bench. If that bench is not at a comfortable height for you, there’s every chance you won’t be using it as much because it’s too hard to see what’s on the bench and not so easy to work with.
Standard Kitchen Bench Height
Some kitchen benches can be adjusted to suit your height. Such a kitchen counter height is adjustable and increases and decreases with a hydraulic system (usually controlled by a switch). This feature allows you to adjust it according to your needs, for example, when you need to lean on it. A kickboard height is about 150 mm above the floor.
Standard Kitchen Bench Height Australia
Other kitchen bench height measurements have a fixed height and remain the same all the time. This is the case with most custom-made benches, but can also be found in some pre-built kitchens. It’s not a good idea to get a fixed bench if you regularly change your cooking habits e.g. baking one day, frying the next etc. The standard dimensions are around 900mm in height.
Kitchen Bench Heights
A bench that’s too high or too low for you can lead to back pain and eventually cause an injury. It doesn’t allow you to position yourself comfortably when preparing food. If you’re not comfortable at your workbench, it may be difficult to control how you cut a vegetable, slice meat, or keep your balance when carrying a pot full of boiling water. When the bench height is too low, you may find it difficult to reach into high cupboards and off shelves.
Kitchen Bench Height Australia
When inspecting a kitchen bench height always make sure that your feet barely touch the floor while standing in front of the benchtop. You could be able to lift one foot and rest it on the floor for balance or leverage. If you can’t do this comfortably without your feet touching the floor, either ask someone to raise (or lower) it for you or look for another bench that’s more suited to your height.
When designing your kitchen remember that not everyone is of average height. When you design your own kitchen, make sure that the benches are in proportion to your size and stature, you could not feel cramped when standing at a bench for any length of time.
Kitchen Bench Dimensions
A standard benchtop width is around 1200mm (50 inches), but it can be narrowed or widened to suit your needs. This is where you could take into consideration the amount of work you plan to do in your kitchen. If you’re going to be baking your own cakes and bread, you may want a wider bench (around 1400mm or 55 inches) to prepare all the ingredients for this type of cooking at once.
Kitchen Bench Dimensions Australia
If you are on the shorter side, then go for a bench that’s around 800mm to 850mm wide with a kickboard height of just 100mm and kickboard depth of just 50mm. If you have a small kitchen it may be the best option even if you plan to do plenty of cooking in it. Even people who are slightly taller than average might find a wider bench an asset i.e. double sinks for washing and rinsing, more storage space underneath etc.
The average height of kitchen benches in Australia is 900mm above the floor level i.e. around 36 inches (90cm). This varies depending on who may be using it, adults or children, and what they’ll be using it for, cooking, dining etc. A good rule of thumb is that if you’re going to spend any length of time standing at your kitchen bench, your feet could barely touch the floor.
If you have a bigger family, or simply enjoy cooking and being surrounded by everything you need within easy reach, then go for the standard size of 00mmto 750mm deep, and from 900mm to 1200mm wide.
Standard Kitchen Bench Depth
In a bigger kitchen with an island bench, the standard width of 1200mm is fine because there’s plenty of space for multiple cooks to work side-by-side. People who love cooking may easily find any excuse available to use it, so having all the gadgets and appliances within easy reach may add to their kitchen experience.
Kitchen Benchtop Height
A small kitchen usually has a narrow surface, with cabinets above and/or below it. A wider, standard-sized bench is easier to work on but it may take up more floor space. If you have a small kitchen, the best solution might be a narrower benchtop with adjustable height and/or stools for seating.
Average Kitchen Bench Height
A bench cabinet height of 900mm is considered standard but lower floor cabinets are also available. Height can affect many aspects of food preparation including ease of access to items stored beneath the bench and fit into cupboards.
Average Kitchen Bench Depth
The average benchtop cabinet depth is around 600mm but can vary depending on its purpose and use. Standard bench depths range from 400mm to around 750mm and can be as wide as 1400mm. It depends on the interior design so take that into account.
Standard Kitchen Bench Width
Making a choice for your kitchen design between a u-shape, L-shape or island kitchen is a matter of preference and kitchen space available. The key to success with any kitchen design is to plan ahead of time what you want from it and how you may use it.
Kitchen Bench Size
An island bench could be around 1100mm (43 inches) above the floor level i.e. around 42 inches (110cm). If you’re going to use it solely as a food preparation area then 950mm (37 inches) is sufficient, but if you’re going to prepare both food and beverages in your kitchen then 1050mm (41 inches) is a better option in addition to providing enough space for wheelchair access through its corners in future.
Height of Kitchen Bench
If you have enough space to add an island into your design then do it. This way, you can continue using it without having to move away (and potentially disturbing) everything else in the kitchen i.e. appliances etc. Another important factor to consider when measuring for an island is whether you may want wheelchair access through any of its corners at some point n the future e.g. selling your house with elderly parents or relatives who need special consideration for mobility reasons may become a priority number one in 10 years time, if not now.
Depending on the width, different materials are used for the kitchen benchtop, which includes stainless steel, stone, granite, marble and timber. The most popular are stainless steel, stone and granite.
Stone benchtops are fire resistant but susceptible to heat. Don’t use them where heat is generated regularly e.g. ovens, direct flame etc. Stone benchtops are also susceptible to scratches and stains, for this reason, you could consider using a wood chopping board when preparing raw meats or vegetables on the kitchen benchtop surface.
If your home has an open plan living space, consider having two separate areas e.g. one for cooking and food preparation, another for dining and relaxing after preparing the meal. You can opt for a U-shaped or angular shaped bench that fits into an inside corner if you have limited space in your house that’s on the market for sale. Use both sides of the bench e.g. have a butcher block on one side and a chopping board on the other, or work from both sides of your kitchen bench depending on what you’re preparing at that particular time.
Average Benchtop Thickness
The kitchen benchtop height is measured from the floor to the top of the benchtop. Kitchen worktops are usually thicker than 15mm and can reach 40mm, but this refers to how high it is in practical terms when you stand in front of it. That’s also the distance between two benches, one behind the other (distance between).
When designing the kitchen, for example for a new house or renovation, you may want to include average benchtop thickness in your measurements because it affects how much storage space you have.
Overhead Cupboards Clearance
The standard dimensions for your kitchen bench are 600mm (width) by 900mm (benchtop depth) if you have a single sink somewhere in the middle of the bench. The overhead cupboards are usually around 1700mm above the floor. Usually, there is 800mm of space between the floor cabinet with a standard benchtop and the wall cabinets.
If you have two sinks, then standard dimensions are 1200 by 900mm for above mount or 600 by 900mm for under-mount. Adjust your measurements accordingly to fit into an island bench, L-shape, U-shape, depending on your kitchen design measurements.