There are many reasons you might need to install a dishwasher. Maybe your old one broke, or it’s too small for the size of your family. Whatever the case may be, there is no denying that installing a dishwasher can save you time and money in the long run. But before we get into how much it costs to install a dishwasher and what factors may affect this cost, let’s first take a look at why you might want to install one in the first place.
- Easier than washing dishes by hand every day
- Saves water and energy
- Cleans better than manual scrubbing
Now that we know some of the benefits of installing a dishwasher, let’s discuss installation costIn most cases, the cost of installing a dishwasher may depend on three things:
- The type of plumbing you have in your home (determined by age and location)
- Type of dishwasher you may be installing
- General fees charged by plumbers for this type of work
How Much to Install a Dishwasher
When it comes to installation, portable dishwashers typically cost more than their countertop counterparts. However, some contractors may charge the same price for both since they can use the same lines and hookups. If you want to install a built-in model under your counters, there’s also a good chance that this job may be costly as well depending on what kind of cabinetry is needed and any additional hardware required.
If your old dishwasher was a standard one that just sits on the floor and your new portable dishwasher may sit right next to it, there also won’t be much difference in installation cost. Here we have listed some of the factors that might affect installation cost:
- The size and type of dishwasher you choose
- Where you have to drill into cabinetry to install
- Walls or cabinets that need to be removed
- Type of water hookup needed
- Distance from drain line needed
- Any special codes required for new plumbing setup (i.e. low flow or direct connect)
The cost of installing a dishwasher may vary greatly depending on a variety of things. The style of dishwasher you choose, as well as whether or not you need to get rid of your old one, are examples of such factors. The following costs do not include the dishwasher price tag:
- The cost of a dishwasher that is entirely or somewhat integrated may range from $150 to $180 for a basic installation.
- The cost of getting your dishwasher removed ranges from $115 to $140.
- A dishwasher installation might cost more than $500 depending on its complexity.
How Much Does it Cost to Install a Dishwasher?
Plumbing services in Australia range from $100 to $150 per hour. If they need to replace an old dishwasher, there may be a call-out fee of between $60 and $100. The cost of pipes, sinks, various dishwasher connection gizmos and valves may all be included, this can raise the total cost of a good dishwasher to anywhere from $500 to $1,500, depending on how much piping is required and whether any other expenses are involved.
If you want a dishwasher installed before you install it, an electrician might charge $140 to $180 for the installation, depending on how much labour and time is required. There may also be a call-out or service fee of between $60 and $100. Getting rid of an old dishwasher costs between $115 and $140. If you need to hire a plumber or electrician, it’s best to get quotes from at least three different service providers before deciding on one. That way you can compare dishwashers cost and find the best deal for your home.
If you want a built-in dishwasher as well, this may be an extra expense. While it may be cheaper to acquire a cabinet that complements your kitchen rather than having one constructed specifically for you, it may not be an option for everybody. As a result, a cabinet maker may be needed to take all of the measurements for your built-in dishwasher.
Dishwasher Installation Prices
A power point generally costs between $140 and $180 to install, depending on the amount of labour required. A cheap installation that takes only 20 minutes costs around $140, while a more complicated setup that takes over an hour costs around $180. Electricians charge between $150 and $200 for a power point install, but some electricians charge call-out or service fees for simple tasks. To get lower prices on the installation of a power point, obtain estimates from electricians for basic work.
If you can locate a flat-pack dishwasher cabinet that matches your kitchen, it may be less expensive than having a dishwasher cabinet constructed and installed by a cabinet maker. However, you may not be able to find an exact match for your kitchen, and you’ll need to receive quotations from cabinet makers regarding the cost of constructing a dishwasher cabinet. A built-in dishwasher isn’t too costly, but the installation process may take longer owing to careful measurements required for a built-in dishwasher and the time needed to install it.
You have two options if you’re having a kitchen makeover. Kitchens that are flat-packed are significantly less expensive than traditional conversions, but you’ll need to build your own or hire a handyman to install it for you. Because all kitchens aren’t square, the worktop may also be professionally installed since installers know how to do it flawlessly. You may also need to hire an electrician to connect a power point and a plumber to install pipes, a sink, and taps. Even with these extra expenditures, you may still save money because flatpack kitchens range from $2600 to $12,000 while custom-built kitchens can cost anywhere from $35,000 to over $100,000.
Cost to Install Dishwasher
The number and kind of requirements for each installation may differ, and the installer can tell you how long it may take to finish after examining the infrastructure necessary. As a result, the time required may influence the cost. A simple installation might take around half an hour to an hour. Having a cabinet constructed for you, on the other hand, may extend that time, even more, implying that it’s well worth scheduling aside some of your days just in case anything goes wrong with the installation.
For this, skilled plumbers may connect the dishwasher, drainage lines, water supplies and electrical outlets. If your property already has pre-existing connections, the dishwasher installation cost may be between $60 and $120. The dishwasher installation cost for houses without hookups can be up to $200.
Average New Dishwasher Price
A typical new dishwasher costs about $450. That may seem like a lot of money, but when you break that down into minutes it’s just 12 cents per minute for washing dirty dishes. If you use your dishwasher once a day for an hour every day, you’re spending only six and a half cents per minute to clean your dishes.
Of course, not everybody spends the exact same amount of time in front of their dishwasher as they do waiting at the dentist or behind their oven cleaning up after baking a cake. In fact, our research shows that if one person were to spend 15 full minutes doing nothing but washing dishes by hand every day, they’d spend about $27.75 per year on water and soap. In Australia you can expect to pay around:
- $400 to $2000 for a freestanding dishwasher
- $800 to $2500 for an under bench dishwasher
- $500 to $4000 for a semi-integrated dishwasher
- $500 to $5500 for a fully-integrated dishwasher
Keep in mind that these exclude the dishwasher installation costs and are for a brand new dishwasher that you may use to wash dishes.
Total Cost Breakdown to Install a Dishwasher
Without factoring in new dishwasher prices, the installation cost might range from $150 to $450. The complexity of the installation may determine the final cost. Furthermore, paying for a basic compact machine does not equate to what it would cost for a bespoke integrated machine. Let’s get this party started by breaking down the cost of these installations.
Plumbers generally charge anywhere from $50 to $250 per hour. It might take several hours to complete a task. If you’re creating new drain lines or rerouting the old ones, you’ll need extra labour. If it’s a new dishwasher installation, you’ll need additional outlets. Rewiring them and connecting the wires takes a long time. Each ground outlet might cost anywhere from $150 to $200 per hour depending on the labour rates of the individual contractors. A competent dishwasher installer could be able to finish the job in a few hours.
You may have to change the cabinetry to accommodate your dishwasher, thus raising the installation costs. You may opt for a freestanding dishwasher if you like a more streamlined look. Adjustments might take two to three hours and cost anywhere from $60 to $150 per hour, depending on how complicated they are.
What is a Semi-Integrated Dishwasher?
This type of dishwasher provides a smooth and seamless fit on the underside of the countertop. There’s no gap between the door and the body of the machine, so it doesn’t look cheap. Most manufacturers offer them in various sizes and shapes to suit your unique needs, but they come at a premium price, anything from $600 to $1,500. A fully integrated dishwasher looks like an integral part of your kitchen cabinetry. They may cost anywhere from $600 to more than $2,000 (or more).
What is a Dishwasher Cabinet?
A dishwasher cabinet is another option that costs less than $90. You can install it in just half an hour. It doesn’t take up any space under the countertop, so you’ll still have room to store your food containers and cutlery drawers. Keep in mind, however, that it won’t be as durable or reliable as a standard dishwasher installation.
Freestanding dishwashers have a simple design so they’re easy to install. They may even include a power cable set and a water-inlet hose, which makes it easier for you to hook them up on your own. If you do not want to or cannot install the new dishwasher yourself, then this might be the perfect solution since it still lets you enjoy the benefits of a dishwasher without hiring a professional. It’s also easier to uninstall, which makes it ideal for short-term renovations or rental properties.
How Long does it Take to install a dishwasher?
The installation process depends on the dishwasher model, but most high-end integrated dishwashers take more than two hours. It might even take up to four hours for a very complicated install. Most standard models can be installed within an hour or so. Dishwasher repair costs are determined by your warranty, where you live and how long it takes the technician to get to your place. If you’re under warranty, then there’s no extra charge unless additional parts are required. A typical repair of an old machine would cost anywhere from $100 to $200 while a more complex repair could set you back up to $500.
You’ll have to replace any broken parts depending on their type and cost. An under-counter dishwasher installation is quite straightforward and you can do it yourself if you’re up for the task. You’ll need about four hours to set things up, but you won’t have to worry about any major plumbing since most units come with built-in water supply lines. Keep in mind however that this doesn’t include the electrical components, make sure they match your local standards before buying anything.
The bottom line is, hiring a pro might cost you anywhere from $400 to more than $2,000 (or more). It all depends on what kind of machine you want, where your home is located and how easy the installation process is. The easiest way to save money on dishwasher repair or installation is to go with a standard model that doesn’t require much in terms of plumbing, electrical work, etc. Make sure you get as much information before you shop online.